1、塑料弯曲试验机外观采用烤漆处理，只需以干布擦拭去除表层灰尘即可，如长时间不使用，请以外罩遮盖。
1. The appearance of the plastic bending tester is treated by baking paint. Only wipe the dust on the surface with a dry cloth. If it is not used for a long time, please cover it with a cover.
2、塑料弯曲试验机的夹具皆经标准电镀处理，塑料弯曲试验机在一般使用状态下仅需以干布去除灰尘，如长时间不用请以干净棉布沾上少许防锈油在夹具表面擦拭即可。
2. The clamps of the plastic bending tester are all treated by standard electroplating. In general use, the plastic bending tester only needs to remove dust with a dry cloth. If you don't need to use a clean cotton cloth with a little anti rust oil for a long time, wipe it on the surface of the fixture.
3、在使用前后应保持清洁且切忌碰撞。
3. Keep clean and avoid collision before and after use.
4、设备使用室温、湿度、电源电压、安装基础（机台周围一般要求无震动、无腐蚀性介质、无较强电磁场干扰）等一定要在规定范围内。
4. Equipment use room temperature, humidity, power supply voltage, installation foundation (generally no vibration, corrosive medium, strong electromagnetic interference around the machine) must be within the specified range.
5、如长时间不使用设备，宜定期插电开动；
5. If the equipment is not used for a long time, it should be plugged in and started regularly;
6、塑料弯曲试验机应由专人负责，试验时应严格按照操作规程进行，严禁做超出试验范围的试验，试验完毕应使仪器恢复到初始位置，以确保下次试验正常进行；
6. The plastic bending tester shall be in the charge of a specially assigned person. The test shall be carried out in strict accordance with the operating procedures. It is strictly prohibited to carry out the test beyond the scope of the test. After the test, the instrument shall be restored to its original position to ensure that the next test can be carried out normally;
7、应定期对塑料弯曲试验机进行清洁、检验，需校准的仪器应校准，以保证仪器的精度；
7. The plastic bending tester shall be cleaned and inspected regularly, and the instruments to be calibrated shall be calibrated to ensure the accuracy of the instruments;
8、塑料弯曲试验机在不使用的时候，应采取适当的保护措施，塑料弯曲试验机如长时间不用，再使用的时候应重新检验后方可使用。
8. When the plastic bending tester is not used, appropriate protective measures shall be taken. If the plastic bending tester is not used for a long time, it shall be re inspected before use.
About the electronic universal testing machine http://www.jnsd17.com introduced here first, I believe you will use the relevant knowledge in the actual work, if you have this need, welcome to purchase.
QQ客服