1、该试验机具有完善的润滑系统及安全保护系统，润滑系统主要由润滑油泵、专用继电器及管路组成。润滑系统的管路通向各旋转关节及运动部位，对所有运动部位进行循环润滑，从而保证试验机可以长时间连续运转，同时润滑油泵还可以对脉动器进行快速充油，使作动器塞快速运动到工作位置。在试验过程中，若发生试件断裂、试验力过限、试验次数天达设定值、润滑系统不正常等现象时，试验机应有自动报警及停机装置。
1. The tester has perfect lubrication system and safety protection system, which is mainly composed of lubricating oil pump, special relay and pipeline. The pipeline of the lubrication system leads to all rotating joints and moving parts, and circulates lubrication to all moving parts, so as to ensure that the testing machine can operate continuously for a long time. At the same time, the lubricating oil pump can also fill the pulsator quickly, so that the actuator plug can move to the working position quickly. During the test, if the test piece breaks, the test force exceeds the limit, the number of tests reaches the set value, and the lubrication system is abnormal, the tester shall be equipped with an automatic alarm and shutdown device.
2、该机由专用油泵为脉动器系统补充液压油，由负荷加载保持系统完成试验力的加载与控制，该专用油泵完全满足该机长期疲劳试验的要求。
2. The special oil pump is used to supplement the hydraulic oil for the pulsator system, and the load holding system is used to load and control the test force. The special oil pump fully meets the requirements of the long-term fatigue test of the machine.
3、锚具疲劳试验机脉动器配置五个输出接口，与疲劳加载试验控制模块连接，可以同时连接十个作动器同步工作，即系统试验通道数为10个。
3. The pulsator of anchorage fatigue testing machine is equipped with five output interfaces, which are connected with the control module of fatigue loading test. Ten actuators can be connected at the same time to work synchronously, that is, the number of system test channels is 10.
4、液压脉动器是产生高压脉动油的机构，由励磁调速电机、可调式偏心曲轴连杆机构、脉动油缸、负荷保持阀、专用油泵及润滑系统等部分组成。
4. The hydraulic pulsator is a mechanism for producing high pressure pulsating oil, which is composed of excitation speed regulating motor, adjustable eccentric crank rod mechanism, pulsating oil cylinder, load holding valve, special oil pump and lubricating system.
大家在使用任何一款试验机之前都要对产品做好充分了解，以便于操作过程中更好的实现人机磨合。从而提高生产效率。以上就是锚具疲劳试验机的用途与功能特点的相关介绍，相信大家看完之后对此都有了一定的了解，希望可以给您带来帮助。
Before using any testing machine, we should fully understand the product, so as to better realize the human-machine running in in the process of operation. So as to improve production efficiency. The above is the relevant introduction of the purpose and functional characteristics of the anchor fatigue testing machine. I believe you have a certain understanding of this after reading, and hope to help you.
The wonderful content of this article is provided by the knowledge of hydraulic universal testing machine. There are many wonderful contents in this website. For more contents, you can click to enter: http://www.jnsd17.com We have special customer service to answer your questions
QQ客服